honda fit rear seat removal

We brought the car seat with us when we did our shopping, and the Honda Fit being high on my list, it was our first (and only) stop.

Install the seat belt in the reverse order of removal, and note these items: Check that the retractor locking mechanism functions as described. Honda has you covered: Both the Tall and Utility mode configurations can be done at the same time thanks to the rear seat’s 60/40 split, making it incredibly versatile. Rear door sill trim, both sides. We're going to do a road trip and want to sleep in the car. Remove bolts, then you will need to disconnect the wiring harnesses from under the seat. Rear seat leg guide cover, both sides. A unique feature on the Fit is the tall cargo mode, in which either or both of the rear seat cushions can be folded upward and locked into place, providing room for tall items to be placed on the floor. Pry up at the gap (A) to detach the clips and the pins (B), then remove … Remove the retractor mounting self-tapping ET screw (A), and the retractor bolt (B), then remove the rear seat belt (C) and retractor (D). There are some plastic clips in the front & rear of the seat tracks. Rear door inner seal, as needed.
Remove the head restraints and fold up the rear seats to create up to four feet of vertical space in the Honda Fit for taller cargo items*. We've test driven it, liked the features, color, everything. You now have an excessive amount of lounge space, to wait to pick someone up, take a break from a long road trip or just hang out for a bit. Be sure to have your radio anti-theft code.

At the dealership, we tested the seat inside the Fit wand while it was a tight fit, we were okay with it at the time. It also creates a nice little office space to catch up on emails. EX-L shown in Aegean Blue Metallic. Make sure it is latched in place by pulling on the top of the seat.
To lock the seat-back upright, push it firmly against the trunk panel. You'll even find a convenient storage compartment under the driver's side rear seat cushion. 5. I heard a crack sound and the lever is apparently disconnected from release mechanism and the seat back will not release from the trunk. Watch tutorials about your 2010 Honda Fit Rear Seat Operation, including videos and tips designed to improve safety and performance. Push the seat-back down, then let go of the release. To properly fulfill their function, they almost have to be touching the back of the driver’s and front passenger’s heads. We worked on it today and …

Contact

 

LINE Contact